Tag Archives: Buffalo check

Beddy’s: The Perfect Bunk Bed Solution

I have been dreaming of Beddy’s ever since Jenna used them HERE and HERE. My boys are getting a little older and have been begging me for bunk beds so I finally bit the bullet and found a perfect excuse to get Beddy’s! Jenna raves about how amazing they are and let me tell you, they are every bit as fabulous as everyone says and here is why…

Bunk beds can get so messy looking depending on what bedding you use and I LOVE that Beddy’s always look clean and put together.

I LOVE that my 3 and 5 year old can make their OWN bed by THEMSELVES!

I LOVE that it ZIPS! (So EASY!)

I LOVE that the days they don’t make their bed, I can make it myself in 2.5 seconds. (Seriously, it is that fast)

I LOVE the fabulous CHECKED OUT print! I about died when this came out.  (You should all know by now that black and white buffalo check is my jam)

I LOVE how well made they are.

I LOVE that it is all ONE piece. (No sheets to mess with, yay!!!)

I LOVE that I can throw it all in the washer so easily.

I LOVE  the cozy soft minky lining.

I LOVE that I no longer have to tuck a blanket around every side of the mattress until it is perfectly smooth on my 3 year old when he gets out of bed 20 times. He jumps in and zippity zip, 2.5 seconds and he’s tucked in! It is like magic!

I sound like I am writing a love song to Beddy’s . Maybe I am. When you find something you love so much, you shout it from the rooftops.

Beddys have my heart. The end.

 

DIY Fabric “Wallpaper”

When I was designing Ridge’s nursery, I knew I wanted to incorporate some black and white buffalo check. I found some wallpaper that I LOVED, but it was pricey and I wasn’t sure how permanent I wanted it to be. Then I remembered that IKEA sold a really cute, large scale buffalo check fabric. I began researching how to make it stick to my walls and found some great options!

Materials:

Fabric of your choice

Liquid starch

Thumb tacks and painters tape

Paint roller and tray

Small sponge brush

X-acto knife

  1. Measure the area you want to cover and add 6 or so inches to each side to allow for shrinkage. Add more if you plan on pre-washing your fabric. I didn’t pre-wash because i’m a lazy DIY’er.
  2. Steam or iron your fabric to get all the wrinkles out. I also didn’t do this at first and ended up having to steam part of it while the other part was stuck on the wall. FUN times haha!
  3. I started by using thumbtacks and tape to secure my fabric to the top of the wall
  4. Starting at the top corner I rolled some liquid starch on the wall then smoothed my fabric on top of it. Work in small areas because the starch dries fast!
  5. Then roll the liquid starch on top of the fabric. You want to make sure it is completely saturated.
  6. Continue doing this along the whole wall working in 1-2 foot increments. Be careful not to pull the fabric too taught. I used a small sponge brush along the edges to make sure they were very saturated and I used pins every foot or so to really secure it while it dried.
  7. Allow to dry completely. At this point I taped all the excess back to the wall. It will look splotchy until it dries. 
  8. Use an x-acto knife to trim off the excess

My awesome mom  was kind enough to help me with this project. She always seems to get roped into my nesting projects, sorry mom! She is seriously the best though. I think this could be done by yourself, but an extra set of hands is very helpful if you have them!

I haven’t tried removing my fabric yet, but from what I’ve read it comes off easily with just water! I love how it turned out and love that its something i can easily change if i want to!

This is a fairly easy project that can give you the look of wallpaper without the removal hassle. My favorite bonus is it can be done on a very tight budget if you can find fabric you love inexpensively!

(Side note: I thought about editing out the lovely bite marks on my crib but decided not to because that’s life. My THREE amazing, sweet, precious boys have slept in this  crib and the imperfections each of them has added over time reminds me of how fast time flies by and how important is it to cherish each day. Life is messy, dirty and imperfect just like my furniture, and I wouldn’t have it any other way!! Sentimental rant over…) 

Buffalo Check Wall

 

neutral fall home tourAs some of you may have seen on Instagram, I recently painted a buffalo check wall in my hallway. I knew when we very first looked at this home that this wall needed something special. I had a completely different idea of what i wanted to create in this space but due to lack of funds and a husband that was not on board with my original plan (lame) I decided to try a quick fix until we could do what we really wanted to do here. Little did i know, I would LOVE it and not want to change it. EVER. I originally saw THIS treatment done by Holly Mathis in a gorgeous home she helped design. We love Holly. Everything she touches is gold. So after seeing her gorgeous room I pulled out my trusty Pinterest to look for tutorials and only found a couple. I mostly followed this one done by Southern Living but i’m going to share with you a few things i found helpful.

Supplies:

-latex paint (you’ll need a base color and a color for your stripes)

-acrylic glaze (found normally in a can in the paint section at your hardware store)

-something to mix your paint and glaze in

-foam roller

-painters tape (i tried frog tape for the first time and it worked great)

  1. First you need to figure out how big you want your stripes to be. I wanted mine on a fairly large scale. Around 12″ is what I had in mind. If at all possible you want your horizontal lines to divide evenly into the height of your wall. Example: If my wall was 96″ tall and I wanted my stripes 12″ then 96 divided by 12 would give me 8 evenly spaced 12″ stripes. Of course my wall was not an easily divisible number so my stripes ended up being 11 3/4″. Your vertical stripes will be the same width. It may help to draw it out on paper if it doesn’t make sense in your head.
  2. So now i know my measurements. Decide what you want you base color to be. Then paint your whole wall that color. I used Benjamin Moore Snowfall white.
  3. Now the fun part! Once your wall is completely dry, Tape off your horizontal stripes. I was lazy and used my husbands eyes instead of a level to get them straight. I measured each side of the wall and put a little pencil mark where each stripe should be then put the tape on one end and pulled it over to my other mark. If any thing looked a little off we just moved it a bit. Very technical, I Know 🙂 This worked well for me but if you are in doubt, use a level! 
  4. To make sure my lines were crisp, I went back and painted my base color over the edges of the tape lines to seal it and make sure nothing leaked. I put little pieces of tape on every other stripe so I would remember to leave those white.
  5. Now you get to mix your paint! I used latex paint with an eggshell sheen. I wanted it to be subtle so I used the same color I have throughout my home which is Benjamin Moore Revere Pewter lightened 50%.  I believe any latex paint will do the trick. Mix one part paint to two parts glaze. The glaze is just a clear/ milkyish looking stuff. It’s found normally in a can by the paint section. Once this is mixed, roll it on every other stripe. Use a paint roller, NOT a paint brush. I tried brushing on in some spots and because of the glaze, it made it all splotchy. So make sure to JUST roll it. Try to go over it as evenly as possible and only do 1-2 coats. Be sure if you did 2 coats on one stripe to do two coats on all the stripes. The more coats you do, the darker it’ll be. It WILL look kind of splotchy. DON’T GIVE UP at this point!!!! I thought it looked terrible and almost painted over it, but just wait.
  6. Now pull the tape, you don’t have to wait till it dries to do this.Buffalo check wall
  7. I let the horizontal stripes dry overnight but you could probably do it sooner. You just want to make sure its completely dry. Now tape you vertical lines the same way. Since i couldn’t seal these tape lines with the white paint I just used frog tape and pressed REALLY hard to make sure I didn’t have any leakage. You could also use the clear glaze to seal the tape but the frog tape worked just fine. buffalo check wall 2
  8. Now paint your vertical stripes. Once again, It’s supposed to look sort of transparent. Do NOT feel like you have to keep rolling coats on because it will ruin the effect of it being darker where they overlap.
  9. Pull the tape and your done! Buffalo check wall1neutral fall home tour

I love the visual interest this wall adds. I also noticed I have a thing for  buffalo check. It’s ALL over my house. I may need an intervention. Ever since creating this I’ve been dreaming all sorts of colorful buffalo check walls. Jenna’s house is next!!